NIRECO VIET NAM: http://www.nireco.com/en/company/overseas.html
Overview | Center pivot system | End pivot system |
Overview
The Guide Roll Mechanism is used to correct meandering of the traveling web. The Guide Roll Mechanism is available with the center pivot system and the end pivot system.
NIRECO provides the guide roll mechanism suited to the requirements of web material quality, width, tension, correction quality and speed and installation conditions of a machine by applying its long experience of EPC technologies.
Center pivot system
The center pivot system allows the center of the extending surface of the web on the guide roller side to be the pivot center. Installation may sometimes be difficult, but in all other regards, this is the best intermediary guide roller system.
Features:
- Excellent stability and accuracy of control;
- No negative influence on the upstream side of the guide rollers;
- The design of the center pivot system means that adjustments can be made simply by applying torsion to the web, with minimal risk of creasing.
This makes the center pivot system ideal even for paper, metal and foil webs that have a high modulus of elasticity.
Specification
Model | Applications | Load | Roller material | Maximum tension N | Roller surface length mm |
---|---|---|---|---|---|
LCD-B | For business forms (has built-in width extender) |
Low | Aluminum | 250 | 550, 610 |
LCD-01 | Offset rotary press | Intermediate | Aluminum | 1000 | 1000, 1100 |
LCD-L | General use | Low | Aluminum or steel | 250 | 300~650 |
LCD-M | General use | Intermediate | Aluminum or steel | 500 | 500~800 |
End pivot system
The end pivot system comes in two forms: the dual-roller S-wrap type and the single-roller 90°-wrap type. The dual-roller S-wrap end-pivot system is used in the middle of the web line, while the single-roller 90°-wrap end pivot system is installed at the point where the web makes a 90-degree change in direction.
Specifications
Model | No. of roll | Wrap type | Load | Roller material | Maximum tension N | Roller surface length mm |
---|---|---|---|---|---|---|
LED-L1 | 2 | S-Wrap | Low | Aluminum or steel | 250 | 280~650 |
LES-L1 | 1 | 90°-Wrap | Low | Aluminum or steel | 250 | 280~650 |
LED-M | 2 | S-Wrap | Intermediate | Aluminum or steel | 1000 | 800~1600 |
LES-M | 1 | 90°-Wrap | Intermediate | Aluminum or steel | 1000 | 800~1600 |
Guide Roll Mechanism

- AEG POWER SOLUTIONS
- AIRA VALVE
- AT2E
- Ashcroft
- BARKSDALE
- Baumueller
- BKW KUEMA
- BECKHOFF
- Block Automation
- Bircher
- CEMB
- CELEM Power Capacitors
- cs instruments viet nam
- CEIA Việt Nam
- Dillon
- Dwyer Instruments
- DECA
- Endress Hauser
- ELCO HOLDING
- Framo Morat
- Fotoelektrik Pauly
- HANS SCHMIDT
- FOXBORO
- Gastron
- IWATSU
- Grant Instruments
- IBA Ag
- IPF-Electronic
- INTORQ
- KOGANEI
- KAWAKI
- KYOWA
- KENDRION
- KNICK
- KELLER ITS
- krohne Việt Nam
- Mark-10
- Masoneilan
- MATSUSHIMA
- Matsui
- Matsushima
- OMEGA
- Orion Instruments
- Ohkura
- Nireco
- Pietro Fiorentini
- PILZ
- Pci instruments.
- Pce Instruments
- Rotork
- RE-SPA
-
Redlion
- Bộ điều khiển, thu thập dữ liệu Redlion
- Màn hình HMI & Màn hình hiển thị, bộ đếm Redlion
- Cảm biến, điều khiển quá trình
- Giải pháp truyền thông ethernet
- Giải pháp truyền thông di động M2M Redlion
- Bộ chuyển đổi truyền thông redlion
- THIẾT BỊ ĐIỀU KHIỂN - MÀN HÌNH HMI
- Các loại cảm biến, thiết bị điều khiển quá trình
- Riel
- SCANLAB
- Sauter EU
- Sauter Controls
- Shimadzu
- sitec Việt Nam
- S-E-G
- Tianjin Jinbo
- Taptone
- Teclock
- TDK Lambda
- tantronic
- thwing albert
- UTILCELL
- Vibro Meter
- Wise Control Việt Nam
- Zama Sensor
- YOUNG TECH
- Và Nhiều Hãng Khác
-
Trực tuyến:5
-
Hôm nay:279
-
Tuần này:279
-
Tháng trước:22729
-
Tất cả:2533929