Hệ thống kiểm soát lực căng biên

Mô tả:
Đại lý độc quyền của Nireco tại Việt Nam
Chia sẻ:
Số lượng
số điện thoại

Open loop Tension Control System TCD050



NIRECO VIET NAM: http://www.nireco.com/en/company/overseas.html


Overview |  Feature |  Specifications | 

Open loop Tension Control System  TCD050


The TCD050 s a controller for controlling the tension of a web at the unwinder or winder, without using a tension sensor. The roll diameter is calculated by using signals from two generators mounted on the winding/unwinding reel, and a control signal corresponding to the change in the roll diameter is delivered.


  • The roll diameter can be measured
    The roll diameter is indicated on the indicator while a signal of 0 to 5 V is issued. The TCD050 can be used for other applications such as external taper signals for a closed-loop controller.
  • Not necessary to use gears
    The roll diameter is calibrated internally. It is not necessary to use gears between the measure roll and the pulse generator.
  • The sequence control makes operation easy
    Since a stop signal that is proportional to the roll diameter is output when the line stops, the web is prevented from slackening.
    The re-start level allows smooth re-starting because the stop level immediately before the line stops is stored. In addition, the start level can be set manually with the manual VR by resetting this stored stop level with the reset contact.
  • Applicable to various brakes/clutches
    The control output is available at a voltage of 0 to 10 V and a current of 4 to 20 mA. Using them, the TCD050 can control an electromagnetic brake/clutch and an air brake/clutch.
  • Taper tension can be controlled
    In addition to the constant tension control, the taper tension can be controlled.
  • Compact unit
    This compact unit can be panel-mounted. It can be easily installed in the control panel.
  • Non-contact detecting system
    The non-contact detecting system allows the TCD050 to measure the roll diameter without causing any damage. In addition, it is not necessary to make a roll space for attaching a sensor, which is required with other control systems.
Maximum roll diameter 500, 1000, 1500 mm
Outputs Control output 0 to 10 V (5mA) and 4 to 20 mA DC
Roll diameter output 0 to 5 V (2mA) /maximum diameter
Power supply of pulse generator 12 V DC. 150 mA, 15 V DC. 150 mA
Inputs Gate generator and
pulse generator inputs
"0": 0 to 1 V or less (10 mA)
"1": 10 to 12 V
12V system rectangular wave;
one pulse per revolution of a winding/unwinding reel.
Contact input Reset signal, stop signal and output hold signal Contact switching capacity:
15 V DC, 30 mA or more.
Weight 2.6kg
Power supply AC100/110/200/220V 50/60Hz
Power consumption 5VA
Ambient tenmperature 0 to +50 ℃

Hệ thống kiểm soát lực căng biên

Bình luận của bạn
Danh mục hãng cung cấpDanh mục hãng cung cấp
Hỗ trợ trực tuyến
Liên hệ tư vấn mua hàng
Thống kê truy cập
  • Trực tuyến:
  • Hôm nay:
  • Tuần này:
  • Tháng trước:
  • Tất cả:

 VPĐD: Số 01, đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM

 Ðiện Thoại:  (028) 35121007                Fax: (028) 35121008

 Nhân viên kinh doanh: Hue (Mr.)

 Email:  hue@tmpvietnam.com        Tel: 091 7000655

 VP tại Đức: Am Boscheler Berg 4a 52134 Herzogenrath

 Website: avantgarde-x.de

Hình Thức Thanh Toán
Bản Đồ

© 2017 Tangminhphat.com, all right reserved.

Thiết kế website www.webso.vn


Back To Top