Modules kết nối, giao tiếp Series EasyB

Mã sản phẩm:

Modules giao tiếp, Series EasyB, Communicate Modul

Xuất Xứ:

Đức

Mô tả:

Block Automation Việt Nam, Communicate Module, Modules giao tiếp, Series EasyB

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Communicate Module, Cổng giao tiếp, kết nối hãng block

Communication modules for the EasyB seri

	EB-MODBUS-RTU	EB-IO-LINK	EB-IO-LINK1
For use with
EB‑0824‑xxx‑x, EB‑1824‑xxx‑x, EB‑3824‑xxx‑x	max. 40	max. 40	max. 16
General data
Input rated voltage	24 Vdc	24 Vdc	24 Vdc
Input Voltage range	18 - 30 Vdc	18 - 30 Vdc	18 - 30 Vdc
Maximal residual Ripple of supplied input voltage	3%	3%	3%
Required input voltage for turning‑on of outputs	17.5 Vdc (Turn-off Threshold 16.7 Vdc),	17.5 Vdc (Turn-off Threshold 16.7 Vdc),	17.5 Vdc (Turn-off Threshold 16.7 Vdc),
Required input voltage for turning‑on of outputs	± 0.7 Vdc	± 0.7 Vdc	± 0.7 Vdc
Power dissipation, no load/rated load	0.4 W / 0.85 W	0.36 W / 0.80 W	0.36 W / 0.80 W
Initialization time of module	4,68 ms	4,68 ms	4,68 ms
Over voltage protection	Suppressor diode 33 Vdc	Suppressor diode 33 Vdc	Suppressor diode 33 Vdc
Stand‑by current	26 mA	33 mA	33 mA
Resistance to reverse feed max.	35 Vdc	35 Vdc	35 Vdc
Interface	RTU mode, 8Bit, No Parity, 1 Stop Bit, max. bus participants 32	IO‑LINK	IO‑LINK
Interface		COM3 / 230400 B	COM3 / 230400 B
Bus communication	Read:‑state (tripped, On, Off)	Read:‑state (tripped, On, Off)	Read:‑state (tripped, On, Off)
	‑set/active current	‑set/active current	‑set/active current
	‑input voltage	‑input voltage	‑input voltage
	‑firmware version/serial number	‑firmware version/serial number	‑firmware version/serial number
	Write:‑state (on, off, reset)	Write:‑state (on, off, reset)	Write:‑state (on, off, reset)
Process data
Number	‑	6 Byte	23 Byte
Content	‑	Collective signal, tripped / Channel	Collective signal, tripped / Channel, current / Channel, 4 Byte optional
Signaling
Isolated group input	”13“ Solid State Relay	‑	‑
Isolated group input	58 Vdc/ 40 Vac/ 100 mA	‑	‑
Isolated signal output	”24“ Solid State Relay	‑	‑
Isolated signal output	58 Vdc/ 40 Vac/ 100 mA	‑	‑
Potential‑free signal output	”14“ Solid State Relay	‑	‑
Potential‑free signal output	58 Vdc/ 40 Vac/ 100 mA	‑	‑
Signal output (ON/OFF/Reset)	Reset input	Reset input	Reset input
	Level high = min. 11 Vdc, max. 30 Vdc	Level high = min. 11 Vdc, max. 30 Vdc	Level high = min. 11 Vdc, max. 30 Vdc
	Level low = min. 0 Vdc, max. 5 Vdc	Level low = min. 0 Vdc, max. 5 Vdc	Level low = min. 0 Vdc, max. 5 Vdc
	Jitter: +/‑ 5 %; +/‑ 5 ms	Jitter: +/‑ 5 %; +/‑ 5 ms	Jitter: +/‑ 5 %; +/‑ 5 ms
Approvals
Approvals	UL (prepared), GL (prepared)	UL, GL (prepared)	UL, GL (prepared)
Environment
Ambient temperature	-25 °C to +70 °C	-25 °C to +70 °C	-25 °C to +70 °C
Storage temperature	-25 °C to +85 °C	-25 °C to +85 °C	-25 °C to +85 °C
Derating	-	-	-
Climatic category	3K3	3K3	3K3
Required minimum spacing (left/right)	0 mm	0 mm	0 mm
Type of cooling	Natural convection	Natural convection	Natural convection
Required minimum spacing (over/under)	30 mm	30 mm	30 mm
Relative humidity	5...96 % without condensation	5...96 % without condensation	5...96 % without condensation
Safety and protection
Protection index	IP 20	IP 20	IP 20
Safety class	III, without PE connection	III, without PE connection	III, without PE connection
Degree of pollution	2	2	2
Terminal and mounting
Terminals input, (spring clamp terminal)	‑	max. 16 mm²	max 16 mm²
Terminals interface (spring clamp terminal)	max. 2,5 mm²	max. 2,5 mm²	max. 2,5 mm²
Terminals signalling, (spring clamp terminal)	max. 2,5 mm²	max. 2.5 mm²	max. 2,5 mm²
Mounting position	horizontal for standard rail DIN TS35	horizontal for standard rail DIN TS35	horizontal for standard rail DIN TS35
Measures and weights
Weight	0.040 kg	0.040 kg	0.040 kg
Dimension (W x H x D)	15 x 99 x 60 mm	15 x 99 x 60 mm	15 x 99 x 60 mm
	Dimension Picture	Dimension Picture	Dimension Picture
Order numbers
Order Number	EB‑MODBUS‑RTU	EB‑IO‑LINK	EB‑IO‑LINK1
	back to choices
		Versions 1 to 3 from 3


	Request to BLOCK	Request to BLOCK	Request to BLOCK
	PDF Data sheet	PDF Data sheet	PDF Data sheet

	EB-MODBUS-RTU	EB-IO-LINK	EB-IO-LINK1
For use with
EB‑0824‑xxx‑x, EB‑1824‑xxx‑x, EB‑3824‑xxx‑x	max. 40	max. 40	max. 16
General data
Input rated voltage	24 Vdc	24 Vdc	24 Vdc
Input Voltage range	18 - 30 Vdc	18 - 30 Vdc	18 - 30 Vdc
Maximal residual Ripple of supplied input voltage	3%	3%	3%
Required input voltage for turning‑on of outputs	17.5 Vdc (Turn-off Threshold 16.7 Vdc),	17.5 Vdc (Turn-off Threshold 16.7 Vdc),	17.5 Vdc (Turn-off Threshold 16.7 Vdc),
Required input voltage for turning‑on of outputs	± 0.7 Vdc	± 0.7 Vdc	± 0.7 Vdc
Power dissipation, no load/rated load	0.4 W / 0.85 W	0.36 W / 0.80 W	0.36 W / 0.80 W
Initialization time of module	4,68 ms	4,68 ms	4,68 ms
Over voltage protection	Suppressor diode 33 Vdc	Suppressor diode 33 Vdc	Suppressor diode 33 Vdc
Stand‑by current	26 mA	33 mA	33 mA
Resistance to reverse feed max.	35 Vdc	35 Vdc	35 Vdc
Interface	RTU mode, 8Bit, No Parity, 1 Stop Bit, max. bus participants 32	IO‑LINK	IO‑LINK
Interface		COM3 / 230400 B	COM3 / 230400 B
Bus communication	Read:‑state (tripped, On, Off)	Read:‑state (tripped, On, Off)	Read:‑state (tripped, On, Off)
	‑set/active current	‑set/active current	‑set/active current
	‑input voltage	‑input voltage	‑input voltage
	‑firmware version/serial number	‑firmware version/serial number	‑firmware version/serial number
	Write:‑state (on, off, reset)	Write:‑state (on, off, reset)	Write:‑state (on, off, reset)
Process data
Number	‑	6 Byte	23 Byte
Content	‑	Collective signal, tripped / Channel	Collective signal, tripped / Channel, current / Channel, 4 Byte optional
Signaling
Isolated group input	”13“ Solid State Relay	‑	‑
Isolated group input	58 Vdc/ 40 Vac/ 100 mA	‑	‑
Isolated signal output	”24“ Solid State Relay	‑	‑
Isolated signal output	58 Vdc/ 40 Vac/ 100 mA	‑	‑
Potential‑free signal output	”14“ Solid State Relay	‑	‑
Potential‑free signal output	58 Vdc/ 40 Vac/ 100 mA	‑	‑
Signal output (ON/OFF/Reset)	Reset input	Reset input	Reset input
	Level high = min. 11 Vdc, max. 30 Vdc	Level high = min. 11 Vdc, max. 30 Vdc	Level high = min. 11 Vdc, max. 30 Vdc
	Level low = min. 0 Vdc, max. 5 Vdc	Level low = min. 0 Vdc, max. 5 Vdc	Level low = min. 0 Vdc, max. 5 Vdc
	Jitter: +/‑ 5 %; +/‑ 5 ms	Jitter: +/‑ 5 %; +/‑ 5 ms	Jitter: +/‑ 5 %; +/‑ 5 ms
Approvals
Approvals	UL (prepared), GL (prepared)	UL, GL (prepared)	UL, GL (prepared)
Environment
Ambient temperature	-25 °C to +70 °C	-25 °C to +70 °C	-25 °C to +70 °C
Storage temperature	-25 °C to +85 °C	-25 °C to +85 °C	-25 °C to +85 °C
Derating	-	-	-
Climatic category	3K3	3K3	3K3
Required minimum spacing (left/right)	0 mm	0 mm	0 mm
Type of cooling	Natural convection	Natural convection	Natural convection
Required minimum spacing (over/under)	30 mm	30 mm	30 mm
Relative humidity	5...96 % without condensation	5...96 % without condensation	5...96 % without condensation
Safety and protection
Protection index	IP 20	IP 20	IP 20
Safety class	III, without PE connection	III, without PE connection	III, without PE connection
Degree of pollution	2	2	2
Terminal and mounting
Terminals input, (spring clamp terminal)	‑	max. 16 mm²	max 16 mm²
Terminals interface (spring clamp terminal)	max. 2,5 mm²	max. 2,5 mm²	max. 2,5 mm²
Terminals signalling, (spring clamp terminal)	max. 2,5 mm²	max. 2.5 mm²	max. 2,5 mm²
Mounting position	horizontal for standard rail DIN TS35	horizontal for standard rail DIN TS35	horizontal for standard rail DIN TS35
Measures and weights
Weight	0.040 kg	0.040 kg	0.040 kg
Dimension (W x H x D)	15 x 99 x 60 mm	15 x 99 x 60 mm	15 x 99 x 60 mm
	Dimension Picture	Dimension Picture	Dimension Picture
Order numbers
Order Number	EB‑MODBUS‑RTU	EB‑IO‑LINK	EB‑IO‑LINK1